| |
|
| RO Water Plant- Commercial/ Industrial Purifiers |
| 100 LPH / MS DLX |
 |
Basics of Design & Water Treatment
PLANT INTRODUCTION
This produces quality water at the flow rate of 100 litres per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system.
RAW WATER ANALYSIS
This water treatment system is based on the following water analysis: |
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Total Dissolved Solids (TDS) |
2000ppm |
| 2 |
Turbidity |
1 NTU |
| 3 |
SDI |
4 |
| 4 |
Heavy Metals |
NIL |
| 5 |
Organics And Bacteria |
NIL |
| 6 |
Oil And Grease |
NIL |
| 7 |
Residual Chlorine |
NIL |
| 8 |
Temperature |
< 40˚C |
| 9 |
Color |
Colorless |
| 10 |
Odour |
Very Less Odour |
| 11 |
BOD & COD |
NIL |
| 12 |
Total Hardness |
850 PPM |
|
END WATER QUALITY
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Total Dissolved Solids (TDS) |
< 100ppm |
| 2 |
PH |
7.0 ± 0.2 |
| 3 |
Turbidity |
NIL |
| 4 |
Color |
NIL |
| 5 |
Hardness |
< 50ppm |
RO PLANT OPERATING CONDITION
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Feed Flow Rate |
250 Ltr |
| 2 |
Product Flow Rate |
100 LPH |
| 3 |
Rejest Flow Rate |
150 LPH |
| 4 |
Recovery |
35% to 40% |
TREATMENT SCHEME
| Sl. No. |
Description |
| 1 |
Raw Water Transfer Pump |
| 2 |
Multi–Grade Filter |
| 3 |
Activated Carbon Filter |
| 4 |
Antiscalant Dosing System |
| 5 |
Micron Filter ( 20 micron & 5 micron ) |
| 6 |
High Pressure Pump |
| 7 |
RO Module (Membrane & Membrane Housing) |
| 8 |
Flushing/Cleaning System,Products (Pure) Water Storge Tank (By Client) |
|
The end water quality is achieved subject to:
- Feed quality should be same as required. In case of any change in the quality of raw water, the same may have an implication on the operating parameters and End-Water quality of the system.
- Feed limiting an implication on the operating Para meter and end water quality of the system
- Feed limiting condition is to be strictly maintained and operation of the water treatment plant should be strictly followed in totality as per the operating manual and instructions.
|
TECHNICAL SPECIFICATION
| 1. Raw Water Transfer Pump: |
| Quantity Required |
One |
| Material of Construction |
CI |
| Make of Material |
Kirloskar/c.g |
| 2. Multi-Grade Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Graded silex anthracite & sand |
| Vessel make |
Water Life/ Aventurs/ roosh |
| 3. Activated carbon Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Activated Carbon |
| Vessel make |
Water Life/ Aventurs/ roosh |
| 4. Antiscaling Dosing System: |
| Tank |
One |
| Capacity of Tank |
100 Ltr |
| MOC of Tank |
HDPE |
| 5. Dosing Pump: |
| Quantity required |
One |
| Type |
Diaphragm Type Electronic Pump |
| Capacity |
0.5 LPH |
| Make |
E-dose |
| 6. Micron Filter: |
| Quantity requires |
2 |
| Type |
Disposable Cartridge |
| Operation Rate |
1.0m³/hr |
| Operation Pressure |
2.5Kg/cm² |
| Micron Rating |
5 micron |
| Type of Cartridge |
PP Wound |
| MOC |
PP |
| 7. High Pressure Pump: |
| Quantity required |
One |
| Operating flow rate |
7.5m³/hr |
| Operating pressure |
10 – 12 Kg/cm² |
| Make of pump |
cri./raj |
| Type of drive |
single phase |
| 8. RO Membrane: |
| Quantity required |
One |
| Dimension |
Dia 4″, Length 40″ |
| Working Pressure |
180 psi |
| Element |
Spiral Wound Membrane |
| Make |
Filmtech Dow (USA), super flow (USA) |
| 9. Electrical Control Panel |
| Quantity required |
One |
| MOC of Pump |
1 HP |
| Material of construction |
MS skid mount |
| Electrical components make |
L&T/Siemens/Havell’s./CAURAM |
| 10. Flushing Cleaning System: Connected from feed pump |
| Quantity required |
One |
| MoC of pump |
1 HP |
| Capacity |
1.5m³/hr at 2.5Kg/cm² |
| UPVC Fitting |
1 Lot |
|
INSTRUMENTS :
- Pressure Gauges .2 (PIC)
- Flow meters: 2 Nos. (One reject & one permeate)
- Pressure limiting switches: 02 Nos. Line mounted adjustable.
PIPE FITTING: UPVC
SKID: M.S. duly painted/powder coated
EXCLUSIONS
The following are specifically excluded from our scope of work:
- All process inputs, utilities such as tube well for water, power supply and distribution system, inlet-outlet piping etc.
- Fire fighting equipments.
- All civil work including building, shed, foundation, roads, ramps, storage tanks etc.
- Warehousing, storage and safe custody of equipment and other plants item received at site.
- Temporary power supply during construction and erection of plant.
- Effluent treatment.
- Any other services/equipment not specifically mentioned.
- Model of the plant.
|
| 250 LPH / MS DLX |
 |
Basics of Design & Water Treatment
PLANT INTRODUCTION
This produces quality water at the flow rate of 1000 litres per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system.
Raw Water Analysis:
This water treatment system is based on the following water analysis: |
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Total Dissolved Solids (TDS) |
2000ppm |
| 2 |
Turbidity |
1 NTU |
| 3 |
SDI |
4 |
| 4 |
Heavy Metals |
NIL |
| 5 |
Organics And Bacteria |
NIL |
| 6 |
Oil And Grease |
NIL |
| 7 |
Residual Chlorine |
NIL |
| 8 |
Temperature |
< 40˚C |
| 9 |
Color |
Colorless |
| 10 |
Odour |
Very Less Odour |
| 11 |
BOD & COD |
NIL |
| 12 |
Total Hardness |
850 PPM |
END WATER QUALITY
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Total Dissolved Solids (TDS) |
< 200ppm |
| 2 |
PH |
7.0 ± 0.2 |
| 3 |
Turbidity |
NIL |
| 4 |
Color |
NIL |
| 5 |
Hardness |
< 50ppm |
RO PLANT OPERATING CONDITION
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Feed Flow Rate |
650 Ltr |
| 2 |
Product Flow Rate |
250 LPH |
| 3 |
Rejest Flow Rate |
400 LPH |
| 4 |
Recovery |
35% to 40% |
TREATMENT SCHEME
| Sl. No. |
Description |
| 1 |
Raw Water Transfer Pump |
| 2 |
Multi–Grade Filter |
| 3 |
Activated Carbon Filter |
| 4 |
Antiscalant Dosing System |
| 5 |
Micron Filter ( 20 micron & 5 micron ) |
| 6 |
High Pressure Pump |
| 7 |
RO Module (Membrane & Membrane Housing) |
| 8 |
Flushing/Cleaning System,Products (Pure) Water Storge Tank (By Client) |
The end water quality is achieved subject to:
- Feed quality should be same as required. In case of any change in the quality of raw water, the same may have an implication on the operating parameters and End-Water quality of the system.
- Feed limiting an implication on the operating Para meter and end water quality of the system
- Feed limiting condition is to be strictly maintained and operation of the water treatment plant should be strictly followed in totality as per the operating manual and instructions.
|
TECHNICAL SPECIFICATION
| 1. Raw Water Transfer Pump: |
| Quantity Required |
One |
| Material of Construction |
CI |
| Make of Material |
Kirloskar/c.g |
| 2. Multi-Grade Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Graded silex anthracite & sand |
| Vessel make |
Water Life/ Aventurs/ roosh |
| 3. Activated carbon Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Activated Carbon |
| Vessel make |
Water Life/ Aventurs/ roosh |
| 4. Antiscaling Dosing System: |
| Tank |
One |
| Capacity of Tank |
100 Ltr |
| MOC of Tank |
HDPE |
| 5. Dosing Pump: |
| Quantity required |
One |
| Type |
Diaphragm Type Electronic Pump |
| Capacity |
0.5 LPH |
| Make |
E-dose |
| 6. Micron Filter: |
| Quantity requires |
2 |
| Type |
Disposable Cartridge |
| Operation Rate |
1.0m³/hr |
| Operation Pressure |
2.5Kg/cm² |
| Micron Rating |
5 micron |
| Type of Cartridge |
PP Wound |
| MOC |
PP |
| 7. High Pressure Pump: |
| Quantity required |
One |
| Operating flow rate |
7.5m³/hr |
| Operating pressure |
10 – 12 Kg/cm² |
| Make of pump |
cri./raj |
| Type of drive |
single phase |
| 8. RO Membrane: |
| Quantity required |
One |
| Dimension |
Dia 4″, Length 40″ |
| Working Pressure |
180 psi |
| Element |
Spiral Wound Membrane |
| Make |
Filmtech Dow (USA), super flow (USA) |
| 9. Electrical Control Panel |
| Quantity required |
One |
| MOC of Pump |
1 HP |
| Material of construction |
MS skid mount |
| Electrical components make |
L&T/Siemens/Havell’s./CAURAM |
| 10. Flushing Cleaning System: Connected from feed pump |
| Quantity required |
One |
| MoC of pump |
1 HP |
| Capacity |
1.5m³/hr at 2.5Kg/cm² |
| UPVC Fitting |
1 Lot |
|
INSTRUMENTS :
- Pressure Gauges .2 (PIC)
- Flow meters: 2 Nos. (One reject & one permeate)
- Pressure limiting switches: 02 Nos. Line mounted adjustable.
PIPE FITTING: UPVC
SKID: M.S. duly painted/powder coated
EXCLUSIONS
The following are specifically excluded from our scope of work:
- All process inputs, utilities such as tube well for water, power supply and distribution system, inlet-outlet piping etc.
- Fire fighting equipments.
- All civil work including building, shed, foundation, roads, ramps, storage tanks etc.
- Warehousing, storage and safe custody of equipment and other plants item received at site.
- Temporary power supply during construction and erection of plant.
- Effluent treatment.
- Any other services/equipment not specifically mentioned.
- Model of the plant.
|
500 LPH / MS DLX |
 |
Basics of Design & Water Treatment
Plant Introduction:
This produces quality water at the flow rate of 500 liters per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system.
Raw Water Analysis:
This water treatment system is based on the following water analysis: |
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Total Dissolved Solids (TDS) |
2000ppm |
| 2 |
Turbidity |
1 NTU |
| 3 |
SDI |
4 |
| 4 |
Heavy Metals |
NIL |
| 5 |
Organics And Bacteria |
NIL |
| 6 |
Oil And Grease |
NIL |
| 7 |
Residual Chlorine |
NIL |
| 8 |
Temperature |
< 40˚C |
| 9 |
Color |
Colorless |
| 10 |
Odour |
Very Less Odour |
| 11 |
BOD & COD |
NIL |
| 12 |
Total Hardness |
850 PPM |
END WATER QUALITY
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Total Dissolved Solids (TDS) |
< 200ppm |
| 2 |
PH |
7.0 ± 0.2 |
| 3 |
Turbidity |
NIL |
| 4 |
Color |
NIL |
| 5 |
Hardness |
< 50ppm |
RO PLANT OPERATING CONDITION
| Sl. No. |
Parameter |
Analysis Value |
| 1 |
Feed Flow Rate |
-Ltr |
| 2 |
Product Flow Rate |
500 LPH |
| 3 |
Rejest Flow Rate |
- LPH |
| 4 |
Recovery |
35% to 40% |
TREATMENT SCHEME
| Sl. No. |
Description |
| 1 |
Raw Water Transfer Pump |
| 2 |
Multi–Grade Filter |
| 3 |
Activated Carbon Filter |
| 4 |
Antiscalant Dosing System |
| 5 |
Micron Filter ( 20 micron & 5 micron ) |
| 6 |
High Pressure Pump |
| 7 |
RO Module (Membrane & Membrane Housing) |
| 8 |
Flushing/Cleaning System,Products (Pure) Water Storge Tank (By Client)
|
The end water quality is achieved subject to:
- Feed quality should be same as required. In case of any change in the quality of raw water, the same may have an implication on the operating parameters and End-Water quality of the system.
- Feed limiting an implication on the operating Para meter and end water quality of the system
- Feed limiting condition is to be strictly maintained and operation of the water treatment plant should be strictly followed in totality as per the operating manual and instructions.
TECHNICAL SPECIFICATION
| 1. Raw Water Transfer Pump: |
| Quantity Required |
One |
| Material of Construction |
CI |
| Make of Material |
Kirloskar/c.g |
| 2. Multi-Grade Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Graded silex anthracite & sand |
| Vessel make |
Water Life/ Aventurs/ roosh |
| 3. Activated carbon Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Activated Carbon |
| Vessel make |
Water Life/ Aventurs/ roosh |
| 4. Antiscaling Dosing System: |
| Tank |
One |
| Capacity of Tank |
100 Ltr |
| MOC of Tank |
HDPE |
| 5. Dosing Pump: |
| Quantity required |
One |
| Type |
Diaphragm Type Electronic Pump |
| Capacity |
0.5 LPH |
| Make |
E-dose/Kemflo-faq |
| 6. Micron Filter: |
| Quantity requires |
2 |
| Type |
Disposable Cartridge |
| Operation Rate |
1.0m³/hr |
| Operation Pressure |
2.5Kg/cm² |
| Micron Rating |
5 micron |
| Type of Cartridge |
PP Wound |
| MOC |
PP |
| 7. High Pressure Pump: |
| Quantity required |
One |
| Operating flow rate |
7.5m³/hr |
| Operating pressure |
10 – 12 Kg/cm² |
| Make of pump |
Sumo/cri./roosh |
| Type of drive |
single phase |
| 8. RO Membrane Housing: |
| Quantity required |
One |
| Material of Pressure Tube |
4″ × 40″ |
| Element Capacity |
2 nos. |
| Max.Working pressure |
250 psi |
| Make |
Waterlife/roosh/aventura |
| 9. RO Membrane: |
| Quantity required |
2 nos |
| Dimension |
Dia 4″, Length 40″ |
| Working Pressure |
180 psi |
| Element |
Spiral Wound Membrane |
| Make |
Filmtech Dow (USA), super flow (USA) |
| 10. Electrical Control Panel |
| Quantity required |
One |
| Material of construction |
MS skid mount |
| Electrical components make |
L&T/Siemens/Havell’s./CAURAM |
| 11. Flushing Cleaning System: Connected from feed pump |
| Quantity required |
One |
| MoC of pump |
1 HP |
| Capacity |
1.5m³/hr at 2.5Kg/cm² |
| UPVC Fitting |
1 Lot |
INSTRUMENTS :
- Pressure Gauges .2 (PIC)
- Flow meters: 2 Nos. (One reject & one permeate)
- Pressure limiting switches: 02 Nos. Line mounted adjustable.
PIPE FITTING: UPVC
SKID: M.S. duly painted/powder coated
EXCLUSIONS
The following are specifically excluded from our scope of work:
- All process inputs, utilities such as tube well for water, power supply and distribution system, inlet-outlet piping etc.
- Fire fighting equipments.
- All civil work including building, shed, foundation, roads, ramps, storage tanks etc.
- Warehousing, storage and safe custody of equipment and other plants item received at site.
- Temporary power supply during construction and erection of plant.
- Effluent treatment.
- Any other services/equipment not specifically mentioned.
- Model of the plant.
|
| 1000 LPH |
 |
Basics of Design & Water Treatment
PLANT INTRODUCTION
This produces quality water at the flow rate of 1000 litres per hour. It can work continuously for 8 to 9 hours per day besides 0.5 hour to 1 hour for back-washing of the filtration system.
Raw Water Analysis:
This water treatment system is based on the following water analysis: |
TECHNICAL SPECIFICATION
| 1. Raw Water Transfer Pump: |
| Quantity Required |
One |
| Material of Construction |
CI |
| Make of Material |
Kirloskar/c.g |
| 2. Multi-Grade Filter: |
| Quanitity Requires |
One |
| Sixe of Unit Dia X Ht |
13" X 54" |
| Material of Construction |
FRP |
| Max. Pressure Drop |
0.5Kg/cm² |
| Floe Control |
Top Mounted multi port valve |
| Media |
Graded silex anthracite & sand |
| Vessel make |
Aventura |
| 3. Dosing Pump: |
| Quantity required |
One |
| Type |
Diaphragm Type Electronic Pump |
| Capacity |
0.5 LPH |
| Make |
E-dose |
| 4. Micron Filter: |
| Quantity requires |
2 |
| Type |
Disposable Cartridge |
| Operation Rate |
1.0m³/hr |
| Operation Pressure |
2.5Kg/cm² |
| Micron Rating |
5 micron |
| Type of Cartridge |
PP Wound |
| MOC |
PP |
| 5. High Pressure Pump: |
| Quantity required |
One |
| Operating flow rate |
7.5m³/hr |
| Operating pressure |
10 – 12 Kg/cm² |
| Make of pump |
cri./raj |
| Type of drive |
single phase |
| 6. RO Membrane: |
| Quantity required |
One |
| Dimension |
Dia 4″, Length 40″ |
| Working Pressure |
180 psi |
| Element |
Spiral Wound Membrane |
| Make |
Hydrostatic membrane from Pentair India |
| 7. Electrical Control Panel |
| Quantity required |
One |
| Material of construction |
MS skid mount |
| Electrical components make |
B |
|
INSTRUMENTS :
- Pressure Gauges .2 (PIC)
- Flow meters: 2 Nos. (One reject & one permeate)
- Pressure limiting switches: 02 Nos. Line mounted adjustable.
PIPE FITTING: UPVC
SKID: M.S. duly painted/powder coated
EXCLUSIONS
The following are specifically excluded from our scope of work:
- All process inputs, utilities such as tube well for water, power supply and distribution system, inlet-outlet piping etc.
- Fire fighting equipments.
- All civil work including building, shed, foundation, roads, ramps, storage tanks etc.
- Warehousing, storage and safe custody of equipment and other plants item received at site.
- Temporary power supply during construction and erection of plant.
- Effluent treatment.
- Any other services/equipment not specifically mentioned.
- Model of the plant.
|
|
